 |
|  |
| A tap that can be connected to all water butts, barrels and tanks to decrease the filling time of your watering cans. It comes complete with 3/4in |
  | £6.99 |
 |
| |
| For standard round or oval spout taps maximum diameter 18mm. The fitting is se aled to the tap by tightening the clip. |
| £7.99 |
 |
| |
| Design to fit a variety of square, round and mixer taps up to 43mm high by 34mm wide. |
| £14.99 |
 |
| |
| Allows the water supply to be delivered in up to four outlets including up to two with Electronic Water Timers. Can be used with or without the wall |
| £25.99 |
 |
| |
| Traditional style wooden tap to fit the oak whiskey barrels simply tap into possition in the pre-drilled hole at the bottom of the whiskey barrel. |
| £12.99 |
 |
| |
| 3/4" BSP Pro Metal tap connector suitable for use with 95% of all outdoor taps. It includes a 1/2" adaptor for older taps. Produced from N |
| £5.99 |
 |
| |
| By using this hose fit replacement tap you can connect a hose pipe to the water butt to make watering your garden much easier. This hose tap is for |
| £6.99 |
 |
| |
| The Pro Metal 1" BSP tap connector is suitable for use with garden irrigation pumps or taps typically found on farms, in factories or in horticu |
| £4.99 |
![Draper 1/2" Bsp Garden Hose Tap Connector](http://www.tooled-up.com/Artwork/ProdZoom/DRA89387.jpg "Draper 1/2" Bsp Garden Hose Tap Connector")
![Draper 3/4" Bsp Garden Hose Tap Connector](http://www.tooled-up.com/Artwork/ProdZoom/DRA89388.jpg "Draper 3/4" Bsp Garden Hose Tap Connector")
